Roskildevej 39DK-2000 FrederiksbergDenmarkTel: +45 36 46 01 11Fax: +45 36 46 02 22e-mail: [email protected]2
The suitcase contains small compartments for all the necessary parts; CF cards, CCD Cleaning Kit,
P 45+P 25+P 30+P 21+ P 20+CCD:Full frame CCD (on 645 cameras)Less than full frame CCD (on 645 cameras)Lens factor:1.1 1.1
P 45+ P 25+P 30+P 21+ P 20+CCD: Full frame CCD (on 645 cameras)Less than full frame CCD (on 645 cameras)Lens factor:1.11.
When the system is unpacked the first thing to do, is to give the batteries a full charge.In the Va
The Phase One P+ back comes with two 2500mAh batteries. If you need to purchase extra batteries
The Phase One P+ back is designed specifically to fit on one of several br
When operating in a studio, where connected to a computer via FireWire you are not dependent on battery power or
For more information on capturing tethered with the Phase One Capture One application please consult the online user guide
When capturing an image the green LED is blinking rapidly to indicates that the P+ back is busy.Steady green lig
Capture One Application (Please see the section specific for your camera body for more information on what latency setting
The name Phase One is a trademark of Phase One A/S.The names Mamiya, Hasselblad, Contax, Adobe, Apple, Mac OS X and W
Charge the batteries (Described earlier)Install the focusi
The camera back’s date and time is set according to European time (since Phase One’s production f
When working with CF-cards, card readers and digital cameras it is very important to follow a few rules,
The Phase One Secure Storage system (3S) provides the industriy’s safest memory card handling
Ejecting the card while the P+ back is still writing to the card (red LED is on) will cause images, that are
On Windows XP and Windows 2000:To avoid confusing the system or, worst case, end up with a CF-car
On Mac OS X the formatting cannot be done directly in the finder but is easily done insi
Insert the CF-card in the card reader, and select the drive when it mounts in "My co
When the P+ back is turned on, the screen will always be in its home display position or &
Inside the menu system arrows will indicate the function of the four buttons, the two buttons to the left are used to ente
When the display is in its home position the two buttons to the left, ISO and WB brings you directly to the ISO
When a FireWire cable is inserted and the P+ Back draws the power from FireWire this is shown with an icon in the bottom o
"Play mode" can be used to review, zoom and delete images.From the "Main screen", pressi
Play mode has four view modes, or review modes; Normal image display, Exposure warning overlay, Histogram overl
The zoom has four amounts, Normal, enlargement 1, enlargement 2 and enlargement 3.When zoomed into enlargement 1, 2 or 3 t
Navigate to the delete function by pressing the play button.When in the delete view press the Up and Down buttons t
Pressing the lower left button sets the P+ back in "Menu mode"Entering Menu mode by pressing the lo
Shutter refers to the shutter of the camera the P+ back resides on.Due to the sleeping architecture of the P+ back
In "FileFormat" you can select two options "IIQ Raw L" and "IIQ Raw S"."IIQ
Or if you regret the choice and just want to go back to the previous setting (the one with the little dot), select the &qu
Charging the batteries 12 Syste
When one of the options is selected the “Make Custom WB” will be blinking.Now you are ready to capture the image that shou
This technique is useful because you can bring up to three predefined custom white balances taken in the studio to your lo
The second option in "Play Setup" is "Auto Preview". "Auto Preview" refers to t
In the Brighness setup, you can set the brightnes of the preview LCD screenDefault setting is Bright.Only the B
Scrolling past the last menu entry will reveal the next entry. Now the arrow in the top right side will turn into a double
Power source only has two options, “Autodetect” or “Battery”.In Autodetect, the P+ back will detect if an IEE
Disk Checking is done per default on every card inserted to the P+ back.If for some reason this check is not
"Ready beep" is the small beep that sounds from the camera after a capture is taken.The "Ready b
The "Language" option in the "Configuration" Menu can be used to select preferred language of
The "About" option in the "Setup Menu" displays technical information ab
Formatting on a Windows computer 27Disabling iPhoto Autostart (Mac OS X) 27 Menu button
The functionality of the P+ back is well integrated with the Mamiya 645AFD camera. The P+ bac
To release the battery press the battery release button and slide the battery down and out of the compartment.Power button
The P+ back is fully integrated with the camera body and acts as a part of the w
The image area of the Mamiya 645AFD is approximately 5,6 cm x 4.2 cm. The image area of the P+
The CCD in P+ back is positioned in landscape orientation. Whenever an image is captured in portrait pos
T-mode is not supported for digital backs on the Mamiya 645 AFD. This is usually not a problem
The P+ back for Mamiya 645 AFD also supports the Mamiya RZ67 PRO IID via the 645 AFD adaptor plate ava
When using the P+ back on a Mamiya RZ67 PRO IID, the flash sync should be connecte
Cables shipping with P+ back for Mamiya 645 AFD (Value added purchase only)The P+ backs for Mamiya 645 AFD is shipping wit
Time & Date 49Language 49 Mounting the P+ back on the Mamiya 645AFD 54Mounting the Vi
The Phase One P+ back can be mounted on a wide range of Hasselblad cameras including Hasselb
The image area of the Hasselblad camera body is approximately 6 cm x 6 cm, whereas the image a
The P+ back is fully integrated with the camera body and acts as a true part of the whole camera syst
The P+ back can be rotated to the left and mounted vertically on the Hasselblad body for u
Regardless of which Hasselblad V type camera used, a sync cable is always connected from the lens to
When using the Phase One P+ back with a Hasselblad 555 ELD, the shutter release on the front of the Has
When using the P+ back on some Hasselblad motorized bodies (i.e. Hasselblad ELX or Hasselblad ELM seri
The Phase One P+ back also supports mechanical Hasselblad cameras such as the
Please note that the Phase One P+ back should not be mounted while the camera is set to m
Phase One offers an optional P+ back adaptor plate with Hasselblad mount that enables mounting
Auto exposure 82Double exposure protection 83Image orientation detection 83IR filter on t
Mirror up operation is only recommended if using Mamiya’s own double cable release.The adaptor plate connects to the Mamiy
The P+ backs for Hasselblad V is shipping with th
The Phase One H 101 - P+ back is a single shot digital camera back designed spcifically for the innov
The Hasselblad H1 incorporates a display which displays information of the actual condition of the came
The icon on the second position from the right shows the actual captures left on the storage media,
The H 101 - P+ back CCD is positioned in landscape orientation. Whenever an image is captured
The image area of the Hasselblad H1 is approximately 60 x 45 mm. The image area of the H 101 -
The H 101 - P+ back integrates fully with the H1 camera house and acts
No cables are required between the H 101 - P+ back and the Hasselblad H1 .Flash sync cable must be connected
Cabling Cables shipping with H101 – P+ backs (Value Added purchase only)The P+ backs for Hasselblad H1/H2 is shipping with
Thank you for choosing a Phase One P+ Series digital camera back solution.The Phase One P+ Series, provides
The CONTAX 645 utilizes a TTL phase difference detection type auto focus system. Furthermore th
With the P+ back for Contax it is not possible to accidently double expose the image by capturi
It is only possible to remount the filter without dust in between the filter and the CCD if you have access to special cle
The P+ back for Contax is fully integrated with the camera house and acts as a true
No cables are required between the P+ back and the CONTAX 645. Flash sync cable must be connected t
The supplied release cable must be connected between the multiple pin connecto
Because the CCD element reflects light different than film, and this cannot be communicated to the Contax.Using T
The Phase One P+ back can be used on most large format cameras via the optional Phase One Fl
The Phase One FlexAdaptor On a Phase One FlexAdaptor the P+ back can be used with both Long and
Lens cast may occur if using the camera back with wide- angle lenses e.g. Horseman Digifl
plate in front of the lens and capturing a calibration image that you then apply to all of your capture files you are able
When using LCC in combination with large format capture and image stitching you mus
PLEASE NOTE: As soon as grey calibration is done and the calibration files are saved and appear in the Lens CC drop-down b
Hold the calibration plate in front of the fixed lens (as close as possible), and capt
Start by capturing the two calibration files and the two image files.Save the l
When the Phase One P+ back is not attached to a camera, the camera back must be protected
When a card is inserted into the P–back, a comple
It is not recommended to turn off disk checking, but it is possible by selecting the “Disk Checking” available in the “Men
Comments to this Manuals