Phase One XF Camera System Quick Start Guide download pdf (Page 13)

Navigation | XF Camera System

Rear Dial

This dial is principally used to adjust ISO, and like the mode

dependent Side Dial, is also used for making selections from

both the Camera Function settings and Camera Menu. The

Rear Dial is customizable by pressing the rear key on the XF

top and navigate to Camera Utilities>Control Setup.

Front Button

The Front Button is a mode dependent control set to activate

the depth of ﬁeld function, per default. The Front User control

is customizable by pressing the rear key on the XF top and

navigate to Camera Utilities>Control Setup.

Rear Button

The Rear Button is programmed, per default, to activate the

Mirror Up (MUP). The Rear User control is customizable by

pressing the rear key on the XF top and navigate to Camera

Utilities>Control Setup.

Front Key

A short press on this key activates the camera function icons

displayed on the top touch screen. By default the function

icons cannot be accessed directly until they’re enabled.

Rear Key

The Rear Key is used to gain access to the camera menu. A

short press and release of the Rear key is required to access

the menu. The Rear key’s function is repurposed for navigation

when in this mode.

Camera On/O Button

Press the button to power up the camera. If left untouched, the

camera will enter Sleep mode after some seconds. Press and

hold the button for 2 seconds to power the camera down. The

IQ back will power down after 3 seconds.

On/O Button

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

No comments

Phase One XF Camera System Quick Start Guide Page 13