128
10.2 Battery Socket
Never leave batteries in the socket if the camera or back is not planned
to be used for longer periods.
Keep contacts clean and dry at all times.
External Battery Socket
Use an external battery case PE401 when using the camera in cold
temperatures where the battery capacity may drop.
1. Turn the shutter release mode selector lever to the L position (power
off).
2. Use a coin or similar object to turn and remove the external battery
socket cap.
3. Remove the battery case from the camera body
4. Connect the external battery case to the body. Connect the plug
of the external battery case in which the batteries are installed, to the
external battery socket.
5. Reinstall the original battery case, from which the batteries were
removed, in the body. Turn the battery case lock to lock it in the body.
10.3 Tripod/Electronic Shutter Release Contact
Keep all contacts clean and dry at all time.
When using a tripod with 3/8” screw (instead of 1/4” screw) remove the
small screw[A] from the tripod screw hole on the bottom of the body
using a plus screwdriver, then use a coin to remove the tripod screw
adapter bushing[B].
You will nd Electronic Shutter Release both on the camera body and
on the back. When used, it is recommended to use the shutter release
on the back. Keep both contacts dry and clean.
NOTE:
Make sure to re-install the empty
battery case into the body.
The empty battery cassette must be
inserted into the body.
The batteries may generate heat if the
external battery case is connected
to the body while the batteries are
loaded on the body.
A
B
C
S
M.UP
L
Comments to this Manuals