45
TTL ash
With TTL ash photography, the reection of the ash is metered and
the intensity of the ash is adjusted automatically, which can mean TTL
ash photography may not be suitable for all shooting conditions. In
the cases described below, we recommend that you use a ashmeter
to check the intensity of the ash or to use a manual ash setting.
Example:
1. When the size of the subject you want to light with the ash is
relatively small within the picture
2. When the background behind the subject is extremely bright or when
there is a strongly reective object in the background
3. When the background behind the subject is extremely dark (outdoors
at night, etc.)
4. For ash photography with a narrow lm latitude
Curtain Syncro
When a moving subject has been shot under this function, the ash of
light appears after the moving subject.
Rear curtain sync mode
Front curtain sync mode
This function is set by Custom function setting. Go to page 81 for more
information.
Exposure mode Shutter speed Aperture
P Program AE Automatically set by
camera to 1/60 sec.
when the metered
shutter speed is 1/60
or slower, and 1/125
when it is 1/125 sec.
or faster.
Automatically set by
camera
Av Aperture priority AE Any aperture
Tv Shutter priority AE Automatically set
by camera to 1/125
when the set shutter
speed is 1/125 sec.
or faster.
Automatically set by
camera
M Manual mode Any aperture
X Synchro mode 1/125 sec. or via CF Any aperture
Comments to this Manuals