Phase One IQ2 User's Guide download pdf (Page 92)

7.7 File Format

An IQ back can save les in two different formats; IIQ Raw L and IIQ

Raw S. IIQ stands for Intelligent Image Quality Raw. IIQ L is the default

setting and it is a lossless capture format. IIQ S is a smaller le that is

not a totally lossless format. The IIQ L is approximately 1/3 le size of

a processed TIFF le. IIQ S is approximately 1/5 of a processed TIFF.

7.8 Camera Mode

There are two primary choices in the Camera Mode menu. Mamiya

mount IQ backs have three choices. Select one of the following options:

Normal: The recommended default setting.

Aerial: This mode is design for highly specialist purposes only. It is not

recommended for use without consultation. Contact your Phase One

dealer to nd out more about the Aerial mode.

Warning! Images will be degraded in the Aerial mode unless used with

specialist hard/software.

RZ67ProIID: This mode is designed to optimize the IQ back’s operating

performance with the Mamiya RZ67 Pro IID camera body.

7.9 Shutter Latency

The IQ CCD is put to sleep to reduce power consumption when it is not

in use. The IQ needs to wake up before shooting and the timing of this

wake up signal is referred to as the Latency. The recommended setting

is Normal Latency if the IQ is used with the Phase One 645DF+. Only

change to Zero Latency if you work on technical, large format cameras

or certain manual cameras in special situations. Find out more in the

Appendix from page 141.

7.10 Image Orientation

The Image Orientation function sets and stores the orientation of all

subsequently captured images. Select 0, 80, 180 or 270 to force the

back to mark images as captured with that orientation. The Auto setting

uses the back’s built in orientation sensor to determine the orientation

at the moment of capture. Changing this setting will not affect how

captured images are displayed on the LCD.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 176 177

No comments

Phase One IQ2 User's Guide Page 92